Best V Mount Battery For Bmpcc 4k

There is a huge selection of products and services to choose from. Consumers often struggle to select the right product for their needs. Here are the Top 12 Best V Mount Battery For Bmpcc 4k to help you decide which product to buy.

A number of factors have been considered by our team before finalizing these products, including customer feedback, features, specifications and price.

The following list can be used as a reference for all our readers searching for the Top 12 Best V Mount Battery For Bmpcc 4k. We hope you will find this article helpful!

Best V Mount Battery For Bmpcc 4k

REYTRIC 95Wh(6600mAh) V Mount/V-Lock Battery with D-tap Output Charger and D-Tap Cable Compatible Sony Video Camera Camcorder Broadcast LED Light Replacement Brick for DSLR

$129.99
$99.99
 in stock
as of April 2, 2022 3:50 am

Features

  • High Capacity: 6600mAh/ 95Wh Voltage: 14.8V Battery Type: Polymer Li-ion; Providing same life time of original battery. Super high capacity V Series battery for Blackmagic Ursa Mini and Epic cameras;
  • Compatible with cameras using standard V Mount / V Lock batteries. Compatible with: HVR-S270C PMW-EX330K PMW-EX330L, PMW-580K PMW580L, PDW-680 PDW-700 PDW-850,PMW-TD300,HDW-F900R HDW-680 HDW-800P, PMW-F55 PMW-F5,etc. Super-long lasting charge for each use and more than 500 full recharge cycles over life of the battery.
  • Power D tap Compatible, Independent 5V/2.1A USB output, available to charge smart-phone,etc. The battery also comes with a wall plug and charger for self-charging,so no extra charger is needed. 4-level LED indicator on the side to show remaining power in time.
  • Compact, lightweight solution for powering cameras and monitor,the battery weight only about 1.37lb.Intelligent charging technology, it only takes 3 hours to fully charge the battery from 0 using our smart charger.If you have a charger with a larger current output, the charge time will be shorter.Built-in circuit protection ensures both safety and stability (over charging, short circuit, high temperature, and surge protection).
  • Complies with IATA, ICAO, TSA and UN regulations for air transportation without restrictions. Buy with Confidence Warranty: 30 Days Money Back Guarantee and 12 Months warranty. 24 x 7 email support. If you have any questions, please contact us directly. We are committed to resolving any situation in which our product does not meet your expectations.

KOCACKOO V-Mount Lock Battery Plate Power Supply Splitter Adapter with 15mm Rod Clamp + BMPCC 4K and 6K Locking DC Cable for Blackmagic Pocket Cinema Camera 4K/6K.

$86.90  in stock
as of April 2, 2022 3:50 am

Features

  • ★ The V lock battery plate features a 15 VDC barrel output, an 8 VDC barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
  • ★ 15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.
  • ★ Smart and wide applications power output systems. With the help of the battery plate Power up BMPCC 4K/6K, monitors, DSLR cameras, cellphone, led lights, on camera flash.
  • ★ Low static power comsumption; low temperature coefficient; high conversion efficiency.Over output protection circuit; automatic lock protection.
  • ★ The cable includes DC 5.5*2.5mm right angle to WEIPU two-pin locking connector cable, this cable is suitable for BMPCC 4K/6K.

SmallRig V Mount Battery Adapter Plate for BMPCC 4K & 6K & 6K Pro, Mirrorless DSLR Cameras, Comes with 8V/12V/14.2V D-Tap/5V 2A USB Output Ports & 15 mm Rod Clamp and Adjustable Arm - 3204

$149.00  in stock
as of April 2, 2022 3:50 am

Features

  • 【High Customization】SmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras
  • 【Adjustable Arm】This V lock battery plate features an adjustable arm for quick adjustment of the V mount battery position, to get a perfect angle for your battery like vertically or hang it upside down on the rod system
  • 【Dual 15mm Rod Clamp】This power supply splitter comes with a dual 15mm rod clamp, lock the plate on 15 mm LWS rod system easily and quickly
  • 【Rich Output Ports】It comes with an 8V DC, two 12V DC and a 14.2V D-TAP ports, satisfied different requests. 5V/2A USB output port to power other external accessories like a monitor, a phone, etc.
  • 【Note】 Do not use in damp environment to avoid short circuit; The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS

KOCACKOO V-Mount Lock Battery Plate Power Supply Splitter Adapter with 15mm Rod Clamp + LP-E6 Dummy Battery for BMPCC 4K/6K、DSLR RED Cameras、Camcorders、Canon 5D2/5D3/5D4/6D/6D2/7D/7D2/70D/80D/5DSR

$83.90  in stock
as of April 2, 2022 3:50 am

Features

  • ★ Smart and wide applications power output systems.With the help of the battery plate Power up monitors, DSLR cameras, mobile phone, led lights, on camera flash, etc.
  • ★ Compatibility:Including but not limited to Canon 5D2, 5D3, 5D4, 6D, 6D2, 7D, 7D2, 70D, 80D, 5DSR,5D MarkII, 5D markII ,5D Mark IV and BMPCC 4K/6K etc.
  • ★ The V lock battery plate features a 15V DC barrel output, an 8V DC barrel output, a 12V DC barrel outputs, a 5V DC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
  • ★ 15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.
  • ★ Package Include:1 x KOCACKOO V-Lock Plates. 1 x LP-E6 Dummy Battery Adapter. 1 x 5.5 * 2.5mm DC to DC Spring Cable. 3 x DC Cable. 1x Storage bag.

Supfoto V Mount Battery Plate Power Supply 15mm Rod Mount V Lock Plate with D-Tap & USB Output LP-E6 Dummy Battery for BMPCC 4K/6K Canon 5D2/5D3/5D4/6D/6D2/7D/7D2/70D/80D/5DSR

$81.99  in stock
as of April 2, 2022 3:50 am

Features

  • Power your camera and accessories with this V-mount Battery Plate. Power your camera and accessories using a separately available V-mount battery.
  • The V lock battery plate features a 15 VDC D-Tap output, an 8 VDC barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
  • It also features a 15mm rod clamp that mounts onto standard 15mm LWS rods.This rod bracket system gives the user the flexibility to mount the plate in a variety of different mounting setups.
  • Smart and wide applications power output systems. With the help of the battery plate Power up monitors, DSLR cameras, mobile phone, led lights, on camera flash, etc.
  • The cables include a DC 5.5 * 2.5mm cables, and a LP-E6 dummy battery cable that's compatible with BMPCC 4K/6K, Canon 5D2, 5D3, 5D4, 80D and other cameras and devices.

DRRI D-tap to 4-Port Female Dtap P-Tap Hub Adapter Splitter for Anton Bauer V-Mount Battery/BMPCC 4K 6K/ARRI Red Cameras

$19.99  in stock
2 new from $19.99
Free shipping
as of April 2, 2022 3:50 am

Features

  • D-Tap male to 4-port female Coiled Cable
  • With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate.
  • Max work current: 10 amp max total.
  • Maximum Cable Length: Approx. 120cm. Spring cable can not be shrinked after stretching the longest.
  • with this 14.8V hub is perfet for running a BlackMagic Production 4k, Tilta handle and motor , cameras,multiple wireless systems, Monitor, follow focus, on board light, on board recorderMovis/Ronins , etc

Tilta V-Mount Battery Plate TA-BTP2-V-G 15mm LWS Rod Adapter To Power The BMPCC 4K 6K Camera

$139.00  in stock
9 new from $139.00
1 used from $88.24
Free shipping
as of April 2, 2022 3:50 am

Features

  • This V-mount battery plate allows you to power a compatible camera as well as external accessories using V-mount batteries and the plate’s integrated P-tap/DC power ports.
  • The 15mm LWS rod adapter allows you to attach the battery plate to your camera’s rod setup.
  • Material: Aluminum-alloy, stainless steel, ABS plastic
  • Weight: 0.741 lbs
  • Color: Tilta Gray Finish

Alvin's Cables BMPCC 4K to D Tap Power Cable for Blackmagic Pocket Cinema Camera 4K Gold Mount V Mount Battery Weipu 2 Pin Female to P Tap

$29.99  in stock
2 new from $29.99
Free shipping
as of April 2, 2022 3:50 am

Features

  • D-Tap (P-Tap) Power Cable for the new Pocket 4K Camera from BMD.
  • Plug A: 2 Pin Female.
  • Plug B: Standard Male D-Tap.
  • Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.
  • The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

SmallRig V Mount Battery Adapter Plate for BMPCC 4K & 6K & 6K Pro, Mirrorless DSLR Cameras, Comes with 8V/12V/14.2V D-Tap/5V 2A USB Output Ports and Crab-Shaped Clamp - 3202

$119.00  in stock
as of April 2, 2022 3:50 am

Features

  • 【High Customization】SmallRig V mount battery adapter plate 3202 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras
  • 【Rich Output Ports】It comes with an 8V DC, two 12V DC and a 14.2V D-TAP ports, satisfied different requests. 5V/2A USB output port to power other external accessories like a monitor, a phone, etc.
  • 【Crab-shaped Clamp】This power supply splitter fits rod diameter of 15mm to 30mm. It can mount on different accessories such as a tripod, light stand and a handheld ring for gimbals by its clamp
  • 【Well-made Material】Front case made by premium aluminum alloy, only 362g, lightweight and provides durable protection
  • 【Note】 Do not use in damp environment to avoid short circuit; In order to achieve the maximum compatibility of the crab-shaped clamp, avoid installing the crab-shaped clamp in the center of the plate. The plate fits most V mount batteries but PAGlink series V mount batteries and Patona Premium Battery for BP-190WS.

Supfoto V Mount Battery Plate for BMPCC 4K/6K 15mm Rod Mount V Lock Plate BMPCC Power Supply with D-Tap & USB Output 5.5 x 2.5mm DC Power Cable for BMPCC 6K/4K

$85.90  in stock
as of April 2, 2022 3:50 am

Features

  • Power your BMPCC 4K/6K and accessories with this V-mount Battery Plate. Power your BMPCC 6K/4K and accessories using a separately available V-mount battery.
  • The BMPCC 4K/6K V lock battery plate features a 15 VDC D-Tap output, an 8 VDC barrel output, a 12 VDC barrel outputs, a 5 VDC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
  • It also features a 15mm rod clamp that mounts onto standard 15mm LWS rods.This rod bracket system gives the user the flexibility to mount the plate in a variety of different mounting setups.
  • This DC Male 5.5 x 2.5mm BMPCC 6K/4K Power Adapter Cable enables you to power your Blackmagic Cinema Camera 6K or 4K using an external v mount battery with a 5.5 x 2.5mm barrel port.
  • Smart and wide applications power output systems. With the help of the battery plate Power up monitors, mobile phone, led lights, on camera flash, etc.

Tilta TA-BSP2-V-G V-Mount Battery Plate Baseplate for BlackMagic Pocket BMPCC 4K Camera

$179.00  in stock
2 new from $179.00
1 used from $109.00
Free shipping
as of April 2, 2022 3:50 am

Features

  • It only suits for for BlackMagic Pocket BMPCC 6K 4K camera

Tilta V-Mount Battery Baseplate TA-BSP2-V-G For BlackMagic Pocket BMPCC 4K 6K Camera

$179.00  in stock
2 new from $179.00
2 used from $118.57
Free shipping
as of April 2, 2022 3:50 am

Features

  • The V-mount battery baseplate attaches directly to the bottom of the half and full camera cages. The height of the battery housing can be adjusted to allow you to comfortably house a variety of differently-sized V-mount batteries.
  • The height of the battery housing can be adjusted to allow you to comfortably house a variety of differently-sized V-mount batteries. A dummy battery cable can then be used to power your camera using the extended battery life provided by the V-mount battery. Various other accessories can also be powered using the DC outputs on the side of the plate.

Leave a Comment